Microsoft 63XPL/PS Bedienungsanleitung PDF herunterladen (Seite 5)

2005/12

Q3: Are the consumables re-usable?

No. If you re-use the consumables, ribbon or paper jams are likely. The printer may be damaged permanently.

Problems caused by this are NOT covered by warranty, and HiTi will charge for repair services to the printer.

Please remember: Papers or stickers are sold with the ribbon. The numbers are matched to give you a print out

for each sheet. If you re-use stickers, you will have unused sheets remaining.

Q4: What is the best way to store consumables?

To maintain the quality of your consumables it is necessary to protect them from heat, humidity, sunlight and

dust. Please store unused papers in its original package, place the ribbon cartrige in a re-sealable plastic bag or

any other airtight covering as soon as you finish printing.

Q5: Where can I purchase consumables (ribbon, paper or sticker sheets)?

You can purchase consumables, such as ribbon, paper and sticker packs, from HiTi authorized distributors or

dealers. For more information about local dealers, please visit: http://www.hi-ti.com

Q6: How come the ribbon has run out while there is still paper remaining?

Below are some cases why a ribbon may run out without any printing due to errors or improper operation:

1. If a “ribbon out” problem occurs due to ribbon-searching device errors, the printer will eject HiTi-paper

without printing (white paper), and also wind the ribbon when HiTi-papers are being fed.

2. If a “paper out” problem occurs due to no HiTi-paper in the HiTi-paper cassette, the ribbon will wind up a

little bit to lower down the HiTi-paper lifter. If the starting line of the ribbon passes the functional area of the

ribbon-searching device, the printer will search for the next starting line of the ribbon in order to print, thus

the ribbon could pass frame by frame to proceed printing. Please take out the ribbon cartridge and wind back

the ribbon until the starting line of ribbon is hidden (This operation excludes our professional printer the

HiTi 640DL.).

3. If paper is being loaded while the current print job is being CANCELLED, the printer will eject the HiTi-

paper without printing, and also wind the ribbon when paper is being fed. If the starting line of the ribbon

passes the functional area of the ribbon-searching device, the printer will search for the next starting line of

the ribbon for printing, thus the ribbon could pass frame by frame to proceed printing. If the paper is ejected

without printing, please take out the ribbon cartridge and wind back the ribbon a little bit until the starting

line of ribbon is hidden.

4. If problems like “printer no response” and “write file/port error” occur before printing, the printer will eject

the HiTi-paper automatically, and also wind the ribbon when it feeds paper. If the starting line of the ribbon

passes the functional area of the ribbon-searching device, the printer will search for the next starting line of

the ribbon. Hence one ribbon frame could be passed. If HiTi-paper is ejected without printing, please take the

ribbon cartridges out and wind the ribbon back until the starting line of the ribbon is no longer visible.

5. If printed HiTi-papers are re-used, more HiTi-papers will remain with insufficient ribbon.

6. If the ribbon is wind up into the wrong direction, the starting line may pass the functional area of ribbon-

searching devices, the printer will search for the next starting line of the ribbon for printing, thus the ribbon

could pass frame by frame to proceed printing. Please contact the HiTi’s Service Department for technical

support.

Q7: How can I store the ribbon and paper?

1. Photo paper and ribbon cartridge:

1 2 3 4 5 6 7 8 9 10 ... 93 94

Keine Kommentare

Microsoft 63XPL/PS Bedienungsanleitung Seite 5