Microsoft B4E-00025 Betriebsanweisung Seite 127
- Seite / 168
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Trimble M3 Total Station User Guide 119
Checking and Adjustment 10
11. Calculate the average of all the values of RP, and the average of all the values of
RQ.
12. Compare the value of PQ to averaged RP + averaged RQ. The difference should
be within the specified range of error for the instrument (±23 mm + 2 ppm ×
distance).
At 100 m distance, the error range is ±23.2 mm. If the error is out of range,
contact your dealer.
10.1Checking and adjusting the compensator (C) and index (I)
1. To activate the Adjustment C&I program from
any screen that shows the
CHCK softkey, press
[F3].
The electric level is shown in graphic format.
2. Do one of the following:
– To go to the angle adjustment screen, press
[F1] c/i, see Vertical index and HA
collimation, page 119.
– To go to compensator adjustment, press
[F3] Comp, see Compensator adjustment,
page 120.
– To turn the compensator adjustment on or
off, press
[F4] C-no/C-yes.
B
Tip – Before starting this procedure, level the instrument
precisely.
100.1 Vertical index and HA collimation
1. To open the Adjustment C&I screen, press
[F1] c/i in the Adjust. C&I screen. The
Adjustment C&I screen shows the current sight
axis correction and vertical index correction will
be shown.
2. Do one of the following:
–To reset
c to zero, press [F1] c=0.
–To reset
i to zero, press [F3] i=0.
– To return to the previous screen, press
[ESC].
3. To take an angle measurement on Face-1, press
[MEAS/ENT].
- USER GUIDE 3
- Contact Information 4
- Copyright and Trademarks 4
- Release Notice 4
- Safety and Warnings 5
- Warnings and Cautions 6
- Cautions 7
- Contents 10
- Introduction 1 15
- 1 Introduction 16
- System diagram 17
- Related information 17
- Technical assistance 18
- Your comments 18
- In this chapter: 19
- Hardware overview 20
- CLASS 1 LASER PRODUCT 21
- Maintenance 22
- LCD display and key functions 23
- Key functions 24
- Status bar 26
- [6] three times 27
- Software overview 28
- Principles of display 30
- Input screen 31
- Inputting data 32
- 23.2 Stack 33
- 20.1 List 33
- Before Going to the Field 3 35
- Unpacking the instrument 36
- Packing the instrument 36
- Safety notices 36
- Charging the battery pack 38
- Discharging the battery pack 38
- Selecting a language 40
- [ESC]. The instrument will 41
- Instrument settings 42
- Editing target settings 50
- Reviewing stored data 51
- Deleting data 51
- Searching your data 52
- Adding a point name or number 53
- Adding a layer 54
- Setting up the tripod 56
- Centering 56
- Leveling 57
- Focusing the telescope 58
- Measurement with a prism 59
- Turning on the instrument 61
- Turning off the instrument 62
- Sleep mode 62
- Basic Measurement Screen 5 63
- Measurement mode 64
- Changing the screen display 65
- Changing the distance unit 66
- Taking measurements 67
- Setting the station elevation 69
- Bearing-Distance 71
- Corner-Angle 72
- Intersection 73
- Eccentric Object 74
- Job Manager 6 75
- Creating a new job 76
- The job settings are: 77
- Opening an existing job 78
- Deleting a job 78
- Setting the Control Point job 79
- Displaying job information 80
- Editing data 80
- Coordinates 7 81
- Resection 82
- Known Station 87
- Station elevation 91
- Measure topo 91
- Stakeout by reference line 98
- Stakeout by dividing line 99
- Coordinates 7 101
- 7 Coordinates 102
- Applications 8 103
- Connecting distance 104
- Start connecting distances 105
- Remote object height 108
- Station and offset 110
- screen, do one of the 111
- screen, do one of 111
- screen appears 111
- Vertical plane 113
- , press [F2] hSet 114
- [F3] xSet 114
- , press [F4] y 114
- Compute area 115
- Data Transfer 9 117
- Hardware interface 118
- Specifications 119
- XON/XOFF Control 119
- Nikon data fields 121
- Checking and Adjustment 10 123
- Compensator adjustment 128
- Troubleshooting A 131
- Settings interface 132
- Job Manager 132
- Stakeout 133
- Adjustment C&I 134
- Application 134
- Data Formats B 135
- M5 data format 136
- Data Formats B 137
- Explanation of the data line 138
- Special characters 138
- 138
- B Data Formats 140
- Record Settings 141
- Marking in the M5 format 142
- Value blocks 143
- Recording data lines 144
- Nikon data format 148
- Downloading Nikon raw format 149
- Sideshot records 150
- Stakeout records 150
- F1/F2 records 150
- File format 151
- Data example 152
- Specifications C 153
- Telescope 154
- Measurement range 154
- Measurement intervals 155
- Angle measurement 155
- Dual-axis tilt sensor 155
- Clamps/tangent screws 155
- Tribrach 155
- Level vial sensitivity 156
- Optical plummet 156
- Display and keypad 156
- Battery pack BC-65 156
- Environmental performance 157
- Dimensions 157
- C Specifications 158
- Glossary 159
- Glossary of terms 161
Verwandte Produkte und Handbücher für Router Microsoft B4E-00025
(2 Seiten)
(70 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.026 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern